Installation guide

Surface Wallmount Installation
3-10
3. Remove the mounting bracket from the RoamAbout R2:
a) Completely loosen the captive screw.
b) Slide the bracket until the two screw slots are directly below the two mounting
screws.
c) Lift and remove the bracket from the RoamAbout R2.
4. Flatten the metal mounting bracket tab against the bracket, or remove the tab by
bending it back and forth.
Remove
R2_20
Mounting Bracket
Captive
Screw
Screw
Slot
Screw
Tab
R2_38