Installation guide

Wall/Ceiling Outlet Box Installation
3-4
5. Ensure that the mounting holes on the bracket line up with those on the outlet box.
Additional holes may be drilled in the bracket to accommodate your particular
installation.
NOTE: Remove all drilled material from the area.
6. Secure the mounting bracket to the wall outlet box.
7. Secure the RoamAbout R2 to the mounting bracket:
a) Insert the two RoamAbout R2 shoulder screws into the two mounting bracket
screw slots until secure.
b) Slide the shoulder screws in the mounting screw slots until the screws are secure.
c) Tighten the captive screw to secure the RoamAbout R2.
R2_23
Captive Screw
Install