Installation guide

Reviewing the Site Requirements
1-4
Table 1-3: RoamAbout R2 Power Supply Specifications (World)
Regulatory Compliance
This equipment meets the following safety and electromagnetic compatibility (EMC)
requirements:
• Safety
EC Directive 73/23/EEC (EN 60950) Europe, CSA C22.2 No. 950, AS/NZS 3200
Australia/New Zealand, IEC 950 (CB Scheme) International Countries, UL 1950
USA, TUV European certification, Return Air Plenum Rated UL2043
• Electromagnetic Compatibility (EMC)
AS/NZS 3548 Australia/New Zealand, BCIQ (BSMI) Taiwan, CS-03 Canada, EC
Directive 89/336/EEC (EN 55022) Europe, FCC 47CFR Part 15, Class B USA,
NOM-019-SCR-SCFI Mexico, VCCI V-3 Japan
Parameter Value
Output voltage 42 to 59 VDC
Output current 457 mA to 325 mA
Redundant Power Application • Redundant power may be applied to the
RoamAbout R2.
• Both power connections (front panel and
Ethernet) are electrically isolated.
• Redundant power sources do not need to
be matched for voltage or polarity.
Power Connector Coaxial Type Power Plug that mates with
Switchcraft RAPC712 Jack (Switchcraft 760
or equivalent).
Dimensions:
• Inside Diameter: 2.5 mm (0.100 in.)
• Outside Diameter: 5.5 mm (0.218 in.)
• Barrel Length: 9.5 mm (0.375 in.)
Power Consumption 100 to 240
VA C
16 Watts (19.2 Watts maximum)
Heat dissipation 101 BTU / hour