Specifications

LSNAT Configuration Example
September 8, 2010 Page 22 of 28
• Configuringafaildetectcommandstring,replystring,andreadtillindexvalueforeachHTTP
server
•Enablingeachrealserverbyplacingeachserverinservice
myinternalHTTP Server Farm and Real Server CLI Input
System(rw-config)->ip slb serverfarm myinternalHTTP
System(rw-config-slb-sfarm)->predictor roundrobin
System(rw-config-slb-sfarm)->real 10.10.10.8 port 80
System(rw-config-slb-real)->faildetect type acv
System(rw-config-slb-real)->faildetect acv-command “HEAD / HTTP/1.1\\r\\nHost:
www.myinternalHTTP.com\\r\\n\\r\\n”
System(rw-config-slb-real)->faildetect acv-reply “200 OK”
System(rw-config-slb-real)->faildetect read-till-index 100
System(rw-config-slb-real)->inservice
System(rw-config-slb-real)->exit
System(rw-config-slb-sfarm)->real 10.10.10.9 port 80
System(rw-config-slb-real)->faildetect type acv
System(rw-config-slb-real)->faildetect acv-command “HEAD / HTTP/1.1\\r\\nHost:
www.myinternalHTTP.com\\r\\n\\r\\n”
System(rw-config-slb-real)->faildetect acv-reply “200 OK”
System(rw-config-slb-real)->faildetect read-till-index 100
System(rw-config-slb-real)->inservice
System(rw-config-slb-real)->exit
System(rw-config-slb-sfarm)->exit
System(rw-config)->
Configuring myinternal-80 Virtual Server
ConfigurethevirtualserverforthemyinternalHTTPserverfarmby:
•Namingthevirtualservermyinternal‐80
• AssociatingthevirtualserverwiththemyinternalHTTPserverfarm
• AssigningthevirtualserverIPaddresswiththeidletimeoutvalueof360seconds
•Placingthevirtualserverinservice
myinternal-80 Virtual Server CLI Input
System(rw-config)->ip slb vserver myinternal-80
System(rw-config-slb-vserver)->serverfarm myinternalHTTP
System(rw-config-slb-vserver)->virtual 194.56.13.3 tcp www
System(rw-config-slb-vserver)->idle timeout 360
System(rw-config-slb-vserver)->inservice
System(rw-config-slb-vserver)->