Specifications

Configuring LSNAT
September 8, 2010 Page 15 of 28
Configuring Global Settings
Table 3describeshowtoconfigureLSNATglobalsettings.
Displaying LSNAT Configuration Information and Statistics
Table 4describeshowtodisplayLSNATconfigurationinformationandstatistics.
Table 3 Configuring LSNAT Global Settings
Task Command(s)
In global configuration command
mode, optionally specify a non-default
FTP control port for all virtual servers.
(Default = 21).
ip slb ftpctrlport port-number
In global configuration command
mode, optionally specify a non-default
TFTP control port for all virtual servers.
(Default = 69).
ip slb tftpctrlport port-number
In global configuration command
mode, optionally allow all clients to
directly access all services provided by
real servers, except for those services
configured for server load balancing.
ip slb real-server access unrestricted
In global configuration command
mode, allows specific client networks
to access the real servers without
address translation.
ip slb real-server access client client-ip-address {ip-prefix |
mask}
Table 4 Displaying LSNAT Configurations and Statistics
Task Command(s)
Display the specified or all server farm
configurations
show ip slb serverfarms [detail | serverfarmname]
Display all real server configurations
for this system or those for the
specified server farm.
show ip slb reals [detail | serverfarm serverfarmname [detail]]
Display all or the specified virtual
servers for this system.
show ip slb vservers [detail | virtserver-name]
Display server load balancing
statistics.
show ip slb statistics
Display SLB bindings. show ip slb bindings {match [ip-address | *] | id id | summary}
Display LSNAT configuration
information.
show ip slb info
Display active server load balancing
sticky mode connections.
show ip slb sticky {match sip port dip port | id id | summary}
Display sticky statistics. show ip slb statistics-sticky