Specifications

Reviewing SNMP Settings
March 28, 2011 Page 24 of 27
Target Parameter Profiles
UsethiscommandtodisplayingSNMPtargetparameterprofiles:
show snmp targetparams paramsname
Example
enterasys(su)-> show snmp targetparams enterasys
Target Parameter Name = enterasys
Security Name = Enterasys_user
Message Proc. Model = USM
Security Level = authNoPriv
Storage type = nonVolatile
Status xxxx = active
Target Address Profiles
UsethiscommandtodisplaySNMPtargetaddressinformation:
show snmp targetaddr
Example
enterasys(su)-> show snmp targetaddr
Target Address Name = Enterasys_user
Tag List =
IP Address = 172.29.10.1
UDP Port# = 162
Target Mask = 255.255.255.255
Timeout = 1500
Retry count = 3
Parameters = enterasys
Storage type = nonVolatile
Status xxxx = active
Notify
UsethiscommandtodisplaytheSNMPnotifyconfiguration:
show snmp notify
Example
enterasys(su)->show snmp notify
--- SNMP notifyTable information ---
Notify name = 1
Notify Tag = Console
Notify Type = trap
Storage type = nonVolatile
Status xxxxx = active
Notify name = 2
Notify Tag = TrapSink
Notify Type = trap
Storage type = nonVolatile