Specifications

Reviewing SNMP Settings
March 28, 2011 Page 21 of 27
Reviewing SNMP Settings
UsethefollowingshowcommandsdescribedinthissectiontoreviewSNMPsettings.
Community
UsethiscommandtodisplaySNMPv1/SNMPv2ccommunitynamesandstatus.Notethatthe
namefieldisobscuredforsecuritypurposes:
show snmp community name
Example
enterasys(su)->show snmp community name
Name = ************
Security name = public
Context = “default context”
Transport tag =
Storage type = nonVolatile
Status = active
Context
Usethiscommandtodisplaythe contextlistconfigurationforSNMPview‐basedaccesscontrol:
show snmp context
Example
enterasys(su)->show snmp context
--- Configured contexts:
default context (all mibs)
For show information about.... Refer to page...
Community 21
Context 21
Counters 22
Engineid 23
Groups 23
Group Access Rights 23
Target Parameter Profiles 24
Target Address Profiles 24
Notify 24
Notify Filter 25
Notify Profile 25
Users 25
Views 26