Specifications

QoS Policy-Based Configuration Example
May 09, 2011 Page 35 of 38
•ToS:B8
•SpecifyIRLindex1toassociatethisCoStotheratelimit
Create a Traffic Classification Layer Rule
Createatransport layer3ruleasfollows:
•TrafficClassificationType:IPTCPPortDestination
•EnterinSingleValuefield:1720(TCPPortID)
•ForIPTCPPortDestinationvalue:10.0.0.1withamaskof255.255.255.255
• AssociateCoS10astheactionfortherule
Applying Role and Associated Services to Network Nodes
Onceyouhavecreatedyourrolesandassociatedtheappropriateservices tothem, youmustapply
theappropriaterole(s)tothenetworknodesasfollows:
Router 1
ThepolicyrolecreationdiscussedaboveisappropriateforRouter 1asfollows:
•ApplyroleVoIPCore‐VLAN22toportsge.1.2‐5.
Switch 1
VoIPEdgeandH323CallSetuprolesareappliedtoSwitch1asfollows:
•ApplyroleVoIPEdge‐VLAN12toportsge.1.10‐13.
•ApplyroleH323CallSetuptoportge.1.10
CLI Summaries for This QoS Configuration
ThisQoSconfigurationcan beinputfromtheCLIusingthefollowingentries:
Summary of Command Line Input for S-Series Router 1
s-series(rw)->set policy profile 1 name VoIPCore-VLAN22 cos 5 egress-vlans 22
tci-overwrite enable
s-series(rw)->set policy rule admin-profile vlantag 22 mask 12 port-string
ge.1.2-5 admin-pid 1
s-series(rw)->set policy rule 1 vlantag 22 mask 12 vlan 22 cos 8
s-series(rw)->set cos port-resource irl 1.1 0 unit mbps rate 25
s-series(rw)->set cos reference irl 1.1 8 rate-limit 0
s-series(rw)->set cos 8 priority 5 tos-value 184.0 txq-reference 8 irl-reference 0
s-series(rw)->set cos state enable
Summary of Command Line Input for S-Series Switch 1
s-series(rw)->set policy profile 1 name VoIPEdge-VLAN12 cos 5 egress-vlans 12
tci-overwrite enable