Specifications

CoS Hardware Resource Configuration
May 09, 2011 Page 18 of 38
3 3 * 6 * * * Disabled
4 4 * 8 * * * Disabled
5 5 * 10 * * * Disabled
6 6 * 12 * * * Disabled
7 7 * 14 * * * Disabled
NoCoSreferenceconfigurationwasrequiredforthisexample.TheCoSreferenceshowcommand
willdisplaythedefaultconfiguration.Usetheshowcosreferencetxqcommandtodisplaythe
CoSreferenceconfigurationforportgroup2.0:
System(su)->show cos reference txq 2.0
Group Index Reference Type Queue
----------- --------- ---- ------------
2.0 0 txq 0
2.0 1 txq 1
2.0 2 txq 2
2.0 3 txq 3
2.0 4 txq 4
2.0 5 txq 5
2.0 6 txq 6
2.0 7 txq 7
2.0 8 txq 8
2.0 9 txq 8
2.0 10 txq 8
2.0 11 txq 8
2.0 12 txq 8
2.0 13 txq 8
2.0 14 txq 9
2.0 15 txq 10
Usetheshowcosport‐resourcetxqcommandtodisplaythenewrateshaperconfigurationfor
queue8forportgroup2.0:
System(su)->show cos port-resource txq 2.0
'?' after the rate value indicates an invalid rate value
Group Index Resource Type Unit Rate Algorithm
----------- -------- ---- ---- ---------- ---------
2.0 0 txq perc none tail-drop
2.0 1 txq perc none tail-drop
2.0 2 txq perc none tail-drop
Note: When a CoS show command displays a default TxQ listing, TxQ numbering is based upon a
16 queue display. 8 user configurable queues are listed as even numbers from 0 to 14.