Specifications

Configuring Enterasys Discovery Protocol
October 15, 2008 Page 12 of 14
Configuring Enterasys Discovery Protocol
Enterasys Discovery Protocol Configuration Commands
Table 3listsEnterasysDiscoveryProtocolconfigurationcommands.
Refertothedevice’sCLIReferenceGuideorConfigurationGuide,asapplicable,formoreinformation
abouteachcommand.
Example Enterasys Discovery Protocol Configuration
ThisexampleshowshowtogloballyenableCDP:
Router1(rw)->set cdp state enable
ThisexampleshowshowtoenabletheCDPforportge.1.2:
Router1(rw)->set cdp state enable ge.1.2
ThisexampleshowshowtodisabletheCDPforportge.1.2:
Router1(rw)->set cdp state disable ge.1.2
Enterasys Discovery Protocol Show Commands
Table 4listsEnterasysDiscoveryProtocolshowcommands.
Refertothedevice’sCLIReferenceGuideorConfigurationGuide ,asapplicable,foradescriptionof
theoutputofeachcommand.
Table 3 Enterasys Discovery Protocol Configuration Commands
Task Command
Enable or disable the Enterasys Discovery Protocol
on one or more ports.
set cdp state {auto | disable | enable}
[port-string]
Set a global Enterasys Discovery Protocol
authentication code.
set cdp auth auth-code
Set the message interval frequency (in seconds) of
the Enterasys Discovery Protocol.
set cdp interval frequency
Set the hold time value for Enterasys Discovery
Protocol configuration messages.
set cdp hold-time hold-time
Reset Enterasys Discovery Protocol settings to
defaults.
clear cdp {[state] [port-state port-
string] [interval] [hold-time] [auth-
code]}
Table 4 Enterasys Discovery Protocol Show Commands
Task Command
Display the status of the CDP discovery protocol and
message interval on one or more ports.
show cdp [port-string]
Display Network Neighbor Discovery information
from all supported discovery protocols.
show neighbors [port-string]