Specifications

Configuring LLDP
October 15, 2008 Page 11 of 14
Example LLDP Configuration: Time to Live
Thisexamplesetsthetransmitintervalto20secondsandtheholdmulti p lierto5,whichwill
configureatime‐to‐liveof100tobeusedintheTTL fieldintheLLDPDUheader.
Router1(rw)->set lldp tx-interval 20
Router1(rw)->set lldp hold-multiplier 5
Example LLDP Configuration: Location Information
OnanEnterasysMatrixN‐Seriesdevice,afteryouconfigurealocat ioninformationvalue,you
mustalsoconfiguretheporttosendtheLocationInformationTLVwiththeset lldp port
tx-tlvcommand.ThisexampleconfigurestheELINidentifier5551234567onportsge.1.1
throughge.1.6andthenconfigurestheportstosendthe
LocationInformationTLV.
Matrix(rw)->set lldp port location-info 5551234567 ge.1.1-6
Matrix(rw)->set lldp port tx-tlv med-loc ge.1.1-6
LLDP Display Commands
Table 2listsLLDPshowcommands.Thetableindicateswhichcommandsaredevicespecific.
Refertothedevice’sCLIReferenceGuideorConfigurationGuide ,asapplicable,foradescriptionof
theoutputofeachcommand.
Table 2 LLDP Show Commands
Task Command
Display LLDP configuration information. show lldp
Display the LLDP status of one or more ports. show lldp port status [port-string]
Display the ports that are enabled to send an LLDP
notification when a remote system change has been
detected or an LLDP-MED notification when a
change in the topology has been sensed.
show lldp port trap [port-string]
Display information about which optional TLVs have
been configured to be transmitted on ports.
show lldp port tx-tlv [port-string]
Display configured location information for one or
more ports.
This command applies to Enterasys Matrix N-Series
devices only.
show lldp port location-info [port-
string]
Display the local system information stored for one
or more ports.
show lldp port local-info [port-string]
Display the remote system information stored for a
remote device connected to a local port.
show lldp port remote-info [port-
string]
Display LLDP port network policy configuration
information.
This command applies to Enterasys Matrix N-Series
devices only.
show lldp port network policy {all |
voice | voice-signaling | guest-voice |
guestvoice-signaling | software-voice |
video-conferencing | streaming-video |
videosignaling} [port-string]