Specifications

Configuring Authentication
April 15, 2011 Page 15 of 36
pwa Globally enables or disables PWA
authentication.
Disabled.
pwa enhancemode Allows a user on an un-authenticated
port to enter any URL in the browser to
access the login page.
Disabled.
radius Enable or disable RADIUS on this
device.
Disabled.
radius accounting Enables or disables RADIUS
accounting for this device.
Disabled.
radius accounting
intervalminimum
Specifies the minimum interval before
sending updates for RADIUS
accounting.
600 seconds.
radius accounting retries Specifies the number of times a switch
will attempt to contact an
authentication server for RADIUS
accounting that is not responding.
2.
radius accounting
timeout
Specifies the amount of time for a
switch to make contact with a RADIUS
server.
5 seconds.
radius accounting
updateinterval
Specifies the minimum interval
between interim updates for RADIUS
accounting.
1800 seconds.
radius retries Specifies the number of times a switch
will try to establish with the
authentication server.
3.
radius timeout Specifies the amount of time a switch
will wait to receive a response from the
authentication server before sending
another request.
20 seconds.
realm Specifies authentication server
configuration scope.
Both: management-access and
network-access.
VLAN authorization Enables or disables globally and per
port VLAN authorization.
Globally: Disabled.
Per Port: Enabled.
VLAN egress format Determines whether dynamic VLAN
tagging will be none, tagged,
untagged, or dynamic for an egress
frame.
Untagged.
Table 1 Default Authentication Parameters (continued)
Parameter Description Default Value