Specifications

Configuring Multicast
April 16, 2009 Page 30 of 32
R4>Router(config)#interface vlan 7
R4>Router(config-if(Vlan 7))#ip address 172.4.4.4 255.255.255.0
R4>Router(config-if(Vlan 7))#no shutdown
R4>Router(config-if(Vlan 7))#ip pim sparse-mode
R4>Router(config-if(Vlan 7))#exit
PIM-SM Display Commands
Table 15liststhePIMshowcommandsforEnterasysMatrixN‐Seriesdevices.
Table 16liststhePIMshowcommandsforSecureStackC2andC3devicesandG‐Seriesdevices.
Table 15 PIM Show Commands (Enterasys Matrix N-Series)
Task Command
Display BSR information. show ip pim bsr
Display information about PIM interfaces that are
currently up (not shutdown).
show ip pim interface [interface]
Display information about discovered PIM
neighbors.
show ip pim neighbor [interface]
Display the active RPs that are cached with
associated multicast routing entries.
show ip pim rp [group | mapping |
multicast-group-address]
Display the RP that is being selected for a specified
group.
show ip pim rp-hash group-address
Display the IP multicast routing table. show ip mroute [unicast-source-address
| multicast-group-address] [summary]
Display the IP multicast forwarding table. show ip mforward [unicast-source-
address | multicast-group-address]
[summary]
Display the reverse path of an address in the unicast
table.
show ip rfp
Table 16 PIM Show Commands (SecureStack C2 and C3 and G-Series)
Task Command
Display system-wide PIM-SM routing information. show ip pimsm
Display the table containing objects specific to a PIM
domain.
show ip pimsm componenttable
Display PIM-SM status of the router interfaces. With
the stats parameter, this command displays
statistical information for PIM-SM on the specified
interface.
show ip pimsm interface {vlan vlan-id |
stats {vlan-id | all}}
Display the router’s PIM neighbors. show ip pimsm neighbor [vlan-id]
Display the PIM information for candidate RPs for all
IP multicast groups or for a specific group address.
show ip pimsm rp {group-address group-
mask | all | candidate}
Display the RP that will be selected from the set of
active RP routers.
show ip pimsm rphash group-address