Specifications

Configuring Multicast
April 16, 2009 Page 20 of 32
Table 6listsLayer3IGMPshowcommandsforEnterasysMatrixN‐Seriesdevices.
Table 7listsLayer2IGMPshowcommandsforSecureStack,D‐Series,G‐Series,andI‐Series
devices.
Table 8listsLayer3IGMPshowcommandsforSecureStackC2andC3devicesandG‐Series
devices.
Configuring DVMRP
DVMRP Configuration Commands
Table 9liststheDVMR PconfigurationcommandsforEnterasysMatrixN‐Seriesdevices.
Table 6 Layer 3 IGMP Show Commands (Enterasys Matrix N-Series)
Task Command
Display IGMP information regarding multicast group
membership.
show ip igmp groups
Display multicast-related information about a
specific interface or all interfaces.
show ip igmp interface [vlan vlan-id]
Table 7 Layer 2 IGMP Show Commands (SecureStack, D-Series, G-Series, and I-Series)
Task Command
Display IGMP snooping information. show igmpsnooping
Display static IGMP ports for one or more VLANs or
IGMP groups.
show igmpsnooping static vlan-list
[group group]
Display multicast forwarding database (MFDB)
information.
show igmpsnooping mfdb
Table 8 Layer 3 IGMP Show Commands (SecureStack C2 and C3 and G-Series)
Task Command
Display IGMP information regarding multicast group
membership.
show ip igmp groups
Display multicast-related information about a
specific interface or all interfaces.
show ip igmp interface [vlan vlan-id]
Table 9 DVMRP Configuration Commands (Enterasys Matrix N-Series)
Task Command
Enable or disable DVMRP on an interface. ip dvmrp
no ip dvmrp
Configure the metric associated with a set of
destinations for DVMRP reports.
ip dvmrp metric metric