Specifications

Configuring Multicast
April 16, 2009 Page 16 of 32
Table 3liststheLayer2IGMPconfigurationcommandsforSecureStack,D‐Series,G‐Series,andI‐
Seriesdevices.
Delete a static IGMP entry or remove one or more
ports from an existing entry.
set igmp remove-static group vlan-list
[modify] [include-ports] [exclude-
ports]
Change the IGMP classification of received IP
frames.
set igmp protocols [classification
classification] [protocol-id protocol-
id] [modify]
Clear the binding of IP protocol ID to IGMP
classification.
clear igmp protocols [protocol-id
protocol-id]
Set the number of multicast groups supported by the
Enterasys Matrix N-Series device—to either 4096 or
16,384.
set igmp number-groups number
Table 3 Layer 2 IGMP Configuration Commands (SecureStack, D-Series, G-Series, and I-
Series Devices)
Task Command
Enable or disable IGMP on the system. set igmpsnooping adminmode {enable |
disable}
Enable or disable IGMP on one or all ports. set igmpsnooping interfacemode port-
string {enable | disable}
Configure the IGMP group membership interval time
for the system.
set igmpsnooping
groupmembershipinterval time
Configure the IGMP query maximum response time
for the system.
set igmpsnooping maxresponse time
Configure the IGMP multicast router expiration time
for the system.
set igmpsnooping mcrtrexpire time
Create a new static IGMP entry or add one or more
new ports to an existing entry.
set igmpsnooping add-static group vlan-
list [modify] [port-string]
Delete a static IGMP entry or remove one or more
new ports from an existing entry.
set igmpsnooping remove-static group
vlan-list [modify] [port-string]
Clear all IGMP snooping entries. clear igmpsnooping
Table 2 IGMP Configuration Commands (Enterasys Matrix N-Series) (continued)
Task Command