Specifications

clear physical assetid Setting Basic Device Properties
Enterasys Matrix N Standalone (NSA) Series Configuration Guide 2-57
Example
ThisexampleshowshowtosettheassetIDinformationformodule1to“dfe1”:
Matrix(rw)->set physical assetid module 1 dfe1
clear physical assetid
UsethiscommandtoresettheassetIDforamoduletoazero‐lengthstring.
Syntax
clear physical assetid module module
Parameters
Defaults
None.
Mode
Switchcommand,Read‐Write.
Example
ThisexampleshowshowtocleartheassetID:
Matrix(rw)->clear physical assetid module 1
modulemodule SpecifiesthemoduleforwhichtocleartheassetID.