Specifications

Configuring Multiple Authentication show multiauth session-timeout
27-12 MultiAuth Configuration
Defaults
Ifnoauthenticationtypeisspecified,theidletimeoutvalueisreturnedto300secondsforall
authenticationtypes.
Mode
Switchcommand,Read‐Write.
Examples
Thisexampleshowshowtocleartheidle‐timeoutsessionvaluesforcepandmacauthentication
types,backtodefaultvalueof300seconds:
Matrix(rw)->clear multiauth idle-timeout cep
Matrix(rw)->clear multiauth idle-timeout mac
Thisexampleshowshowtocleartheidle‐timeoutsessionvaluesforallauthenticationtypes,back
tothedefaultvalueof300seconds:
Matrix(rw)->set multiauth idle-timeout
show multiauth session-timeout
Usethiscommandtodisplaysession‐timeoutvalues,inseconds,forallauthenticationmethods.
Syntax
show multiauth session-timeout
Parameters
None
Defaults
None.
Mode
Switchcommand,Read‐Only.
Example
Thisexampleshowshowtodisplaymultipleau thenticationsession‐timeoutvalues,foranactive
session:
Matrix(rw)->show multiauth session-timeout
Authentication type Timeout (sec)
------------------- -------------
dot1x 0
pwa 0
mac 0
cep 0