Specifications

clear multiauth port Configuring Multiple Authentication
Enterasys Matrix N Standalone (NSA) Series Configuration Guide 27-7
Parameters
Defaults
None.
Mode
Switchcommand,Read‐Write.
Examples
Thisexampleshowshowtosettheportmultipleauthenticationmodetorequiredonge.3.14:
Matrix(rw)->set multiauth port mode auth-reqd ge.3.14
clear multiauth port
Usethiscommandtoclearmultipleauthenticationpropertiesforoneormoreports.
Syntax
clear multiauth port {[mode] [numusers] port-string}
Parameters
Defaults
None.
Mode
Switchcommand,Read‐Write.
Examples
Thisexampleshowshowtocleartheportmultipleauthenticationmodeonall1‐GigabitEthernet
ports:
Matrix(rw)->clear multiauth port mode ge.*.*
modeauth‐opt|
auth‐reqd|force‐
auth|force‐unauth
Specifiestheport(s)’multipleauthenticationmodeas:
• auth‐opt—Authenticationoptional
• auth‐reqd—Authentication required
• force‐auth—Authenticationconsidered
• force‐unauth—Authenticationdisabled
numusersnumusers Specifiesthenumberofusersallowedauthenticationonport(s).
port‐string
Specifiestheport(s)onwhichtosetmultipleauthenticationproperties.
mode Clearstheport(s)’multipleauthenticationmode.
numusers Clearsthevaluesetforthenumberofusersallowedauthenticationon
port(s).
port‐string Specifiestheport(s)onwhichtoclearmultipleauthentication
properties.