Specifications

Configuring Multiple Authentication show multiauth port
27-6 MultiAuth Configuration
Mode
Switchcommand,Read‐Write.
Example
Thisexampleshowshowtoclearthemultipleauthenticationprecedence:
Matrix(rw)->clear multiauth precedence
show multiauth port
Usethiscommandtodisplaymultipleauthenticationpropertiesforoneormoreports.
Syntax
show multiauth port [port-string]
Parameters
Defaults
Ifport‐stringisnotspecified,multipleauthenticationinformationwillbedisplayedforallports.
Mode
Switchcommand,Read‐Only.
Example
Thisexampleshowshowtodisplaymultipleau thenticationinformationforportsfe.1.1‐4:
Matrix(rw)->show multiauth port fe.1.1-4
Port Mode Max Allowed Current
users users users
------------ ------------- ---------- ---------- ----------
fe.1.1 auth-opt 128 128 0
fe.1.2 auth-opt 128 128 0
fe.1.3 auth-opt 128 128 0
fe.1.4 auth-opt 128 128 0
set multiauth port
Usethiscommandtosetmultipleauthenticationpropertiesforoneormoreports.
Syntax
set multiauth port mode {auth-opt | auth-reqd | force-auth | force-unauth} |
numusers numusers port-string
port‐string (Optional)Displaysmultipleauthenticationinformationfor specific
port(s).