Specifications

show tacacs Configuring TACACS+
Enterasys Matrix N Standalone (NSA) Series Configuration Guide 25-63
Configuring TACACS+
Purpose
Toperformthefollowing:
•ReviewtheTACACS+clientandserverconfigurationsonthedevice.
•EnableordisabletheTACACS+client.
•Setlocalandremoteloginoptions.
•Setserverparameters,includingIPaddress,timeoutperiod,serverport,andsecret.
•ResetTACACS+clientandserversettingstodefaultvalues.
Commands
show tacacs
UsethiscommandtodisplaythecurrentTACACS+configurationinformationandstatus.
Syntax
show tacacs [state]
Parameters
Defaults
Ifstateisnotspecified,allTACACS+configurationinformationwillbedisplayed.
For information about... Refer to page...
show tacacs 25-63
set tacacs 25-65
show tacacs server 25-65
set tacacs server 25-66
clear tacacs server 25-67
show tacacs session 25-67
set tacacs session 25-68
clear tacacs session 25-69
show tacacs command 25-70
set tacacs command 25-71
show tacacs singleconnect 25-71
set tacacs singleconnect 25-72
state (Optional)DisplaysonlytheTACACS+clientstatus.