Specifications

Configuring RADIUS show radius accounting
25-56 Authentication Configuration
Parameters
Defaults
•IfindexorallisnotspecifiedforclearingRADIUSserver,allRADIUSserversettingswillbe
deleted.
•Ifnootheroptionalparametersarespecified,allRADIUSsettingswillbecleared.
Mode
Switchcommand,Read‐Write.
Examples
Thisexampleshowshowtoclearallsetting sonallRADIUSservers:
Matrix(rw)->clear radius server all
ThisexampleshowshowtoresettheRADI US timeouttothedefaultvalueof20seconds:
Matrix(rw)->clear radius timeout
show radius accounting
UsethiscommandtodisplaytheRADIUSaccountingconfiguration.Thistransmitsaccounting
informationbetweenanetworkaccessserverandasharedaccountingserver.
Syntax
show radius accounting [updateinterval] | [intervalminimum] | [state] | [server
{index | all}]
Parameters
state (Optional)ResetstheRADIUSclientstatetothedefaultsettingof
disabled.
retries (Optional)Resetsthemaximumnumberofattemptsausercancontact
theRADIUSserverbeforetimingoutto3.
timeout
(Optional)Resetsthemaximumamountoftimetoestablishcontact
withtheRADIUSserverbeforetimingoutto20seconds.
server
(Optional)Deletesserversettings.
realm (Optional)Resetstherealmsettingtoallowinganyauthentication.
index|all ResetssettingsforaspecifiedserverorallRADIUSservers.
updateinterval (Optional)DisplaysthenumberofsecondsbetweeneachRADIUS
accountinginterimupdate(whenaccumulatedaccountingdataissent
totheserverforasession.)
intervalminimum (Optional)Displaystheminimumupdateintervalsetting.Thiscontrols
thefrequencyofRADIUSaccountingupdates.
state (Optional)DisplaystheRADIUSaccountingenablestate.
serverindex|all (Optional)
DisplaysoneorallRADIUSaccountingserver
configurations.