Specifications

RADIUS Filter-ID Attribute and Dynamic Policy Profile Assignment clear cep
25-50 Authentication Configuration
RADIUS Filter-ID Attribute and Dynamic Policy Profile Assignment
IfyouconfigureanauthenticationmethodthatrequirescommunicationwithaRADIUSserver,
youcanusetheRADIUSFilter‐IDattributetodynamicallyassignapolicyprofileand/or
managementleveltoauthenticatingusersand/ordevices.
TheRADIUSFilter‐IDattributeissimplyastringthatisformattedintheRADIUSAccess‐
Accept
packetsentbackfromtheRADIUSservertotheswitchduringtheauthenticationprocess.
EachusercanbeconfiguredintheRADIUSserverdatabasewithaRADIUSFilter‐IDattribute
thatspecifiesthenameofthepolicyprofileand/ormanagementleveltheusershouldbeassigned
uponsuccessfulauthentication.During
theauthenticationprocess,whentheRADIUSserver
returnsaRADIUSAccess‐AcceptmessagethatincludesaFilter‐IDmatchingapolicyprofilename
configuredontheswitch,theswitchthendynamicallyappliesthepolicyprofiletothephysical
porttheuser/deviceisauthenticatingon.
Filter-ID Attribute Formats
EnterasysNetworkssupportstwoFilter‐IDformats—“decorated”and“undecorated.”The
decoratedformathasthreeforms:
•Tospecifythepolicyprofiletoassigntotheauthenticatinguser(networkaccess 
authentication):
Enterasys:version=1:policy=string
wherestringspecifiesthepolicyprofilename.Policyprofilenamesarecase‐sensitive.
•Tospecifyamanagementlevel(managementaccess
authentication):
Enterasys:version=1:mgmt=level
wherelevelindicatesthemanagementlevel,eitherro,rw,orsu.
•Tospecifybothmanagementlevelandpolicyprofile:
Enterasys:version=1:mgmt=level:policy=string
Theundecoratedformatissimplyastringthatspecifiesapolicyprofilename.Theundecorated
formatcannotbeusedformanagementaccessauthentication.
DecoratedFilter‐IDsareprocessed
first.IfnodecoratedFilter‐IDsarefound,thenundecorated
Filter‐IDsareprocessed.IfmultipleFilter‐IDsarefoundthatcontainconflictingvalues,aSyslog
messageisgenerated.
Setting the Authentication Login Method
Purpose
Toconfiguretheauthenticationloginmethod.
Commands
Thecommandsusedtoconfiguretheauthenticationloginmethodarelistedbelowanddescribed
intheassociatedsectionasshown: