Specifications

set macauthentication portinitialize Configuring MAC Authentication
Enterasys Matrix N Standalone (NSA) Series Configuration Guide 25-33
Defaults
Ifport‐stringisnotspecifiedthenumberofallowedauthenticationsessionswillbeclearedonall
ports.
Mode
Switchcommand,Read‐Write.
Example
ThisexampleshowshowtoclearthenumberofallowedMACauthenticationsessionsonge.2.1:
Matrix(rw)->clear macauthentication authallocated ge.2.1
set macauthentication portinitialize
UsethiscommandtoforceoneormoreMACauthenticationportstore‐initializeandremoveany
currentlyactivesessionsonthoseports.
Syntax
set macauthentication portinitialize port-string
Parameters
Defaults
None.
Mode
Switchcommand,Read‐Write.
Example
Thisexampleshowshowtoforcege.2.1through5toinitialize:
Matrix(rw)->set macauthentication portinitialize ge.2.1-5
set macauthentication macinitialize
UsethiscommandtoforceacurrentMACauthenticationsessiontore‐initializeandremovethe
session.
Syntax
set macauthentication macinitialize mac_addr
Parameters
port‐string SpecifiestheMACauthenticationport(s)tore‐initialize.Foradetailed
descriptionofpossibleport‐stringvalues,referto“PortStringSyntax
UsedintheCLI”onpage 4 ‐2.
mac_addr SpecifiestheMACaddressofthesessiontore‐initialize.