Specifications

Configuring MAC Authentication show macauthentication session
25-28 Authentication Configuration
show macauthentication session
UsethiscommandtodisplaytheactiveMACauthenticatedsessions.
Syntax
show macauthentication session
Parameters
None.
Defaults
Ifport‐stringisnotspecified,MACsessioninformationwillbedisplayedforallMAC
authenticationports.
Mode
Switchcommand,Read‐Only.
Example
ThisexampleshowshowtodisplayMACsessioninformation:
Matrix(rw)->show macauthentication session
Port MAC Address Duration Reauth Period Reauthentications
----- ----------------- ---------- ------------- -----------------
ge.1.2 00:60:97:b5:4c:07 0,00:52:31 3600 disabled
Table 25‐3providesanexplanationofthecommandoutput.
Port Port designation. For a detailed description of possible port-string
values, refer to “Port String Syntax Used in the CLI” on page 4-2.
Port State Whether or not MAC authentication is enabled or disabled on this port.
Quiet Period Enables a reauthentication attempt for failed entries at the period
specified in seconds. Default value is 0 (never).
Reauth Period Reauthentication period for this port. Default value of 30 can be
changed using the set macauthentication reauthperiod command
described in “set macauthentication reauthperiod” on page 25-35.
Auth Allowed Number of concurrent authentications supported on this port. Default is
1 and cannot be reset.
Auth Allocated Maximum number of MAC authentications permitted on this port.
Default is 1 and cannot be reset.
Reauthentications Whether or not reauthentication is enabled or disabled on this port. Set
using the set macauthentication reauthentication command
described in “set macauthentication reauthentication” on page 25-34.
Table 25-2 show macauthentication Output Details (continued)
Output... What it displays...