Specifications

Setting Basic Device Properties clear summertime
2-44 Startup and General Configuration
Defaults
Ifanoffsetisnotspecified,nonewillbeapplied.
Mode
Switchcommand,Read‐Write.
Usage
Thesesettingswillstartandstopdaylightsavingstimeatthespecifieddayofthemonthandhour
eachyearandwillnothavetoberesetannually.
Example
ThisexampleshowshowsetdaylightsavingstimetorecurstartdateofApril4,2004at2a.m.and
anendingdateofOctober31,2004at2a.m.withanoffsettimeofonehour:
Matrix(rw)->set summertime recurring first Sunday April 02:00 last Sunday October
02:00 60
clear summertime
Usethiscommandtoclearthedaylightsavingstimeconfiguration.
Syntax
clear summertime
Parameters
None.
Defaults
None.
Mode
Switchcommand,Read‐Write.
Example
Thisexampleshowshowtoclearthedaylightsavingstimeconfiguration:
Matrix(rw)->clear summertime
end_hr_min
Specifiesthetimeofdaytoenddaylightsavingstime.Formatis
hh:mm.
offset_minutes
(Optional)Specifiestheamountoftimeinminutestooffsetdaylight
savingstimefromthenon‐daylightsavingstimesystemsetting.Valid
valuesare1‐1440.