Specifications

show pwa session Configuring Port Web Authentication (PWA)
Enterasys Matrix N Standalone (NSA) Series Configuration Guide 25-25
Parameters
Defaults
Enablesordisablesallportsifnoportisspecified.
Mode
Switchcommand,Read‐Write.
Example
ThisexampleshowshowtoenablePWAonallports:
Matrix(rw)->set pwa portcontrol enable
show pwa session
UsethiscommandtodisplayinformationaboutcurrentPWAsessions.
Syntax
show pwa session [port-string]
Parameters
Defaults
Ifport‐stringisnotspecified,sessioninformationforallportswillbedisplayed.
Mode
Read‐Only.
Example
ThisexampleshowshowtodisplayPWAsessio n information:
Matrix(rw)->show pwa session
Port MAC IP User Duration Status
-------- ----------------- --------------- ------------- ------------ ---------
ge.2.19 00-c0-4f-20-05-4b 172.50.15.121 pwachap10 0,14:46:55 active
ge.2.19 00-c0-4f-24-51-70 172.50.15.120 pwachap1 0,15:43:30 active
ge.2.19 00-00-f8-78-9c-a7 172.50.15.61 pwachap11 0,14:47:58 active
enable|disable EnablesordisablesPWAonthespecifiedport.
port‐string (Optionally)Enablesordisablesaspecificport(s).Foradetailed
descriptionofpossibleport‐stringvalues,referto“PortStringSyntax
UsedintheCLI”onpage 4 ‐2.
port‐string (Optional)DisplaysPWAsessioninformationforspecificport(s).Fora
detaileddescriptionofpossibleport‐stringvalues,referto“PortString
SyntaxUsedintheCLI”onpage 4‐2.