Specifications

set summertime recurring Setting Basic Device Properties
Enterasys Matrix N Standalone (NSA) Series Configuration Guide 2-43
Defaults
Ifanoffsetisnotspecified,nonewillbeapplied.
Mode
Switchcommand,Read‐Write.
Usage
Thesesettingswillbenon‐recurringandwillhavetoberesetannually.
Example
ThisexampleshowshowtosetadaylightsavingstimestartdateofApril4,2004at2a.m.andan
endingdateofOctober31,2004at2a.m.withanoffsettimeofonehour:
Matrix(rw)->set summertime date April 4 2004 02:00 October 31 2004 02:00 60
set summertime recurring
Usethiscommandtoconfigurerecurringdaylightsavingstimesettings.
Syntax
set summertime recurring start_week start_day start_month start_hr_min end_week
end_day end_month end_hr_min [offset_minutes]
Parameters
start_year
Specifiestheyeartostartdaylightsavingstime.
start_hr_min
Specifiesthetimeofdaytostartdaylightsavingstime.Formatis
hh:mm.
end_month
Specifiesthemonthoftheyeartoenddaylightsavingstime.
end_date
Specifiesthedayofthemonthtoenddaylightsavingstime.
end_year
Specifiestheyeartoenddaylightsavingstime.
end_hr_min
Specifiesthetimeofdaytoenddaylightsavingstime.Formatis
hh:mm.
offset_minutes
(Optional)Specifiestheamountoftimeinminutestooffsetdaylight
savingstimefromthenon‐daylightsavingstimesystemsetting.Valid
valuesare1‐1440.
start_week
Specifiestheweekofthemonthtorestartdaylightsavingstime.Valid
valuesare:first,second,third,fourth,andlast.
start_day
Specifiesthedayoftheweektorestartdaylightsavingstime.
start_hr_min
Specifiesthetimeofdaytorestartdaylightsavingstime.Formatis
hh:mm.
end_week
Specifiestheweekofthemonthtoenddaylightsavingstime.
end_day
Specifiesthedayoftheweektoenddaylightsavingstime.