Specifications

set pwa Configuring Port Web Authentication (PWA)
Enterasys Matrix N Standalone (NSA) Series Configuration Guide 25-15
set pwa
Usethiscommandtoenableordisableportwebauthentication.
Syntax
set pwa {enable | disable}
Parameters
Defaults
None.
Mode
Switchcommand,Read‐Write.
Usage
PortWebAuthenticationcannotbeenabledifeitherMACauthenticationorEAPOL(802.1X)is
enabled.Forinformationondisabling802.1X,referto“setdot1x”onpage 25‐7.Forinformation
ondisablingMACauthentication,referto“setmacauthentication”onpage 25‐29.
Example
Thisexampleshowshowtoenableportwebauthentication:
Matrix(rw)->set pwa enable
set pwa hostname
Usethiscommandtosetaportwebauthenticationhostname.
Syntax
set pwa hostname name
Parameters
Defaults
None.
Mode
Switchcommand,Read‐Write.
Usage
ThisisaURLforaccessing thePWAloginpage.
enable|disable Enablesordisablesportwebauthenticati on.
name SpecifiesanameforaccessingthePWAloginpage.