Specifications

Configuring 802.1X Authentication show dot1x auth-config
25-6 Authentication Configuration
Defaults
•Ifnoparametersarespecified,all802.1Xsettingswillbedisplayed.
•Ifport‐stringisnotspecified,informationforallportswillbedisplayed.
Mode
Switchcommand,Read‐Only.
Examples
ThisexampleshowshowtodisplaytheEAPOLportcontrolmodeforfe.1.1:
Matrix(rw)->show dot1x auth-config authcontrolled-portcontrol fe.1.1
Port 1: Auth controlled port control: Auto
Thisexampleshowshowtodisplaythe802.1Xquietperiodsettingsforfe.1.1:
Matrix(rw)->show dot1x auth-config quietperiod fe.1.1
Port 1: Quiet period: 30
Thisexampleshowshowtodisplayall802.1Xauthenticationconfigurationsettingsforfe.2.24:
Matrix(rw)->show dot1x fe.2.24
Port: fe.2.24 Auth-Config:
PAE state : Initialize
Backend auth State : Initialize
Admin controlled directions : Both
Oper controlled directions : Both
Auth controlled port status : Unauthorized
Auth controlled port control : Auto
Quiet period : 60 seconds
Tx period : 30 seconds
Supp Timeout : 30 seconds
Server Timeout : 30 seconds
Max requests : 2
Reauthentication period : 3600 seconds
Reauthentication enabled : FALSE
Key tx enabled : FALSE
txperiod (Optional)Displaysthetransmissionperiodvalue,inseconds,currently
inusebytheauthenticatorPAEstatemachine.
port‐string (Optional)Limitsthedisplayofdesiredinformationinformationto
specificport(s).Foradetaileddescriptionofpossibleport‐stringvalues,
referto“PortStringSyntaxUsedintheCLI”onpage 4‐
2.