Specifications

Setting Basic Device Properties set summertime
2-42 Startup and General Configuration
Example
Thisexampleshowshowtodisplaydaylightsavingstimesettings:
Matrix(rw)->show summertime
Summertime is disabled and set to ''
Start : SUN MAR 11 02:00:00 2007
End : SUN NOV 04 02:00:00 2007
Offset: 60 minutes (1 hours 0 minutes)
Recurring: yes, starting at 2:00 of the second Sunday of March and ending at 2:00
of the first Sunday of November
set summertime
Usethiscommandtoenableordisablethedaylightsavingstimefunction.
Syntax
set summertime {enable | disable} [zone]
Parameters
Defaults
Ifazonenameisnotspecified,nonewillbeapplied.
Mode
Switchcommand,Read‐Write.
Example
Thisexampleshowshowtoenabledaylightsavingstimefunction:
Matrix(rw)->set summertime enable
set summertime date
Usethiscommandtoconfigurespecificdatestostartandstopdaylightsavingstime.
Syntax
set summertime date start_month start_date start_year start_hr_min end_month
end_date end_year end_hr_min [offset_minutes]
Parameters
enable|disable Enablesordisablesthedaylightsavingstimefunction.
zone
(Optional)Appliesanametothedaylightsavingstimesettings.
start_month
Specifiesthemonthoftheyeartostartdaylightsavingstime.
start_date
Specifiesthedayofthemonthtostartdaylightsavingstime.