Specifications

set system utilization threshold Setting Basic Device Properties
Enterasys Matrix N Standalone (NSA) Series Configuration Guide 2-39
Name ProcID 5 sec 1 min 5 min
------------------------------------------------------------
Switch Web Server 34 1.4% 1.4% 1.4%
Router Misc. 35 0.0% 0.0% 0.0%
Router Multicast 36 0.0% 0.0% 0.0%
Router Control Plane 37 0.0% 0.0% 0.0%
Router IP 38 0.0% 0.0% 0.0%
Router DHCPS 39 0.0% 0.0% 0.0%
Router OSPF 40 0.0% 0.0% 0.0%
Router RIP 41 0.0% 0.0% 0.0%
Router VRRP 42 0.0% 0.0% 0.0%
Router DVMRP 43 0.0% 0.0% 0.0%
Router PIM 44 0.0% 0.0% 0.0%
Router PIMDM 45 0.0% 0.0% 0.0%
Router ARP 46 0.0% 0.0% 0.0%
Router LSNAT 47 0.0% 0.0% 0.0%
Interrupts 48 0.0% 0.0% 0.0%
OTHER 49 0.0% 0.0% 0.0%
IDLE 50 96.4% 97.0% 97.0%
Storage Utilization:
Slot: 1
Type Description Size (Kb) Available (Kb)
-----------------------------------------------------------------
RAM RAM device 1 131072 22192
Flash Images & Miscellaneous 16384 4138
Flash Nonvolatile Data Storage 16384 14308
set system utilization threshold
UsethiscommandtosetthethresholdforsendingCPUutilizationnotificationmessages.
Syntax
set system utilization threshold threshold
Parameters
Defaults
None.
threshold Specifiesathresholdvalue(in1/10ofapercent).Validrangeis1‐1000.
Avalueof0willdisableutilizationnotificationmessages.