Specifications

show ip address Setting Basic Device Properties
Enterasys Matrix N Standalone (NSA) Series Configuration Guide 2-31
show ip address
UsethiscommandtodisplaythesystemIPaddressandsubnetmask.
Syntax
show ip address
Parameters
None.
Defaults
None.
Mode
Switchcommand,Read‐Only.
Example
ThisexampleshowshowtodisplaythesystemIPaddressandsubnetmask:
Matrix(rw)->show ip address
Name Address Mask
---------------- ---------------- ----------------
host 10.42.13.20 255.255.0.0
show version 2-48
set system name 2-50
set system location 2-50
set system contact 2-51
set width 2-51
set length 2-52
show logout 2-52
set logout 2-53
show physical alias 2-53
set physical alias 2-54
clear physical alias 2-55
show physical assetid 2-56
set physical assetid 2-56
clear physical assetid 2-57
For information about... Refer to page...