Specifications

Setting Basic Device Properties clear mgmt-auth-notify
2-30 Startup and General Configuration
Setting Basic Device Properties
Purpose
TodisplayandsetthesystemIPaddressandotherbasicsystem(device)properties,including
time,contactnameandalias,physicalassetIDsforterminaloutput,timeout,andversion
information.
Commands
Important Notice
Module, slot, and certain other hardware-based parameters in the Matrix N Series Standalone (NSA) CLI
support only chassis based N Series devices, such as the N7, N5, N3 or N1. Executing commands in the
NSA CLI with modular parameters not supported by the standalone will result in an error message.
For information about... Refer to page...
show ip address 2-31
set ip address 2-32
clear ip address 2-32
show ip gratuitous-arp 2-33
set ip gratuitous-arp 2-33
clear ip gratuitous-arp 2-34
show system 2-34
show system hardware 2-35
show system utilization 2-37
set system utilization threshold 2-39
clear system utilization 2-40
show time 2-40
set time 2-41
show summertime 2-41
set summertime 2-42
set summertime date 2-42
set summertime recurring 2-43
clear summertime 2-44
set prompt 2-45
set cli completion 2-45
loop 2-46
show banner 2-46
set banner 2-47
clear banner 2-48