Specifications

Setting User Accounts and Passwords set system lockout
2-24 Startup and General Configuration
Table 2‐4providesanexplanationofthecommandoutput.Thesesettingsareconfiguredwiththe
setsystemlockoutcommand(“setsystemlockout”onpage 2‐24).
set system lockout
Usethiscommandtosetthenumberoffailedloginattemptsbeforelockingout(disabling)aread‐
writeorread‐onlyuseraccount,thenumberofminutestolockoutthedefaultadminsuperuser
accountaftermaximumloginattempts,andthenumberofinactivedaysbeforeanon‐superuser
accountis
lockedout.
Syntax
set system lockout {[attempts attempts] [time minutes] [inactive days]}
Parameters
Defaults
attempts:3
time:15minutes
inactive:0days.
Mode
Switchcommand,SuperUser.
Usage
Aninactivitytimervalueofzeromeansthatnoaccountwillbelockedoutduetoinactivity.
Onceauseraccountislockedout,itcanonlybere‐enabledbyasuperuserwiththesetsystem
logincommand(“setsystemlogin”onpage 2‐16).
Table 2-4 show system lockout Output Details
Output... What it displays...
Unsuccessful login attempts Number of failed login attempts allowed before a read-write or read-
only user’s account will be disabled.
Duration of lockout Number of minutes the default admin user account will be locked out
after the maximum login attempts.
Period of inactivity Number of days of inactivity before a non-superuser account is locked
out. Zero specifies no lockout will occur for inactivity.
attemptsattempts Specifiesthenumberoffailedloginat temptsallowedbeforearead‐
writeorread‐onlyuser’s accountwillbedisabled.Validvaluesare1to
15.
timeminutes Specifiesthenumberofminutesthedefaultadminuseraccountwillbe
lockedoutafterthemaximumloginattempts.Validvaluesare
0to
65565.
inactivedays Specifiestheperiodofinact ivi tyindaysafterwhichanon‐superuser
accountwillbelockedout.Validvaluesare0to65565.