Specifications

Configuring Load Sharing Network Address Translation (LSNAT) serverfarm (Virtual Server)
19-22 LSNAT Configuration
serverfarm (Virtual Server)
UsethiscommandtoassociateavirtualserverwithanLSNATserverfarm.
Syntax
serverfarm serverfarm-name
no serverfarm serverfarm-name
Parameters
Defaults
None.
Mode
Routercommand,SLBVirtualServerConfigurationmode:Matrix>Router(config‐slb‐vserver)#
Usage
The“no”formofthiscommandremovesthevirtualserverassociation.
Example
Thisexampleshowshowtoassociatethevirtual servernamed“virtual‐http”tothe“httpserver”
serverfarm:
Matrix>Router(config)#ip slb serverfarm httpserver
Matrix>Router(config-slb-sfarm)#real 10.1.2.1 port 80
Matrix>Router(config-slb-real)#inservice
Matrix>Router(config-slb-real)#exit
Matrix>Router(config-slb-sfarm)#real 10.1.2.3 port 80
Matrix>Router(config-slb-real)#inservice
Matrix>Router(config-slb-real)#exit
Matrix>Router(config-slb-sfarm)#exit
Matrix>Router(config)#ip slb vserver virtual-http
Matrix>Router(config-slb-vserver)#serverfarm httpserver
virtual
UsethiscommandtoconfigureavirtualserverIPaddress.
Syntax
virtual ip-address {tcp | udp} port [service service-name]
no virtual ip-address
serverfarm‐name Specifiesaserverfarmname.Mustbepreviouslyconfiguredwiththe
ipslbserverfarmcommandasdescribedin“ipslbserverfarm”on
page 19 ‐8.