Specifications

Configuring Load Sharing Network Address Translation (LSNAT) faildetect acv-reply
19-16 LSNAT Configuration
faildetect acv-reply
UsethiscommandtosettheexpectedvalidationACVreplystringfromtheserverapplication
port.
Syntax
faildetect acv-reply “reply-string”
Parameters
Defaults
None.
Mode
Routercommand,SLBRealServerConfigurationmode:Matrix>Router(config‐slb‐real)#
Usage
ThereplytotheACVcommand‐stringisvalidatedagainsttheACVreply‐stringspecifiedinthis
command.
Example
Thisexampleexpectstoreceive“200OK”inreplytothecommandstringsenttotheserver
applicationport7:
Matrix>Router(config)#ip slb serverfarm SF-UPD
Matrix>Router(config-slb-sfarm)#real 10.1.2.4 port 7
Matrix>Router(config-slb-real)#faildetect type app udp
Matrix>Router(config-slb-real)#faildetect acv-reply “200 OK”
Matrix>Router(config-slb-real)#inservice
faildetect acv-quit
Usethiscommandwhentheprotocolrequirestheusertoissueacommandtoclosethesession.
Syntax
faildetect acv-quit “quit-string”
Parameters
Defaults
None.
Mode
Routercommand,SLBRealServerConfigurationmode:Matrix>Router(config‐slb‐real)#
reply‐string Specifiestheexpectedreplyreturnedfromtheservertothecommand
stringsenttotheserver.
quit‐string SpecifiesthequitstringexpectedbytheACVsession.