Specifications

Enterasys Matrix N Standalone (NSA) Series Configuration Guide 14-1
14
Node Alias Configuration
Thischapterdescribesnodealiascommandsandhowtousethem.
Configuring Node Aliases
Purpose
Toreview,configure,disableandre‐enablenode(port)aliasfunctionality,whichdetermineswhat
networkprotocolsarerunningononeormoreports.
Commands
show nodealias
Usethiscommandtodisplaynodealiaspropertiesforoneormoreports.
Syntax
show nodealias [port-string]
Parameters
For information about... Refer to page...
show nodealias 14-1
show nodealias mac 14-2
show nodealias protocol 14-4
show nodealias config 14-5
set nodealias 14-6
set nodealias maxentries 14-7
clear nodealias 14-7
clear nodealias config 14-8
port‐string (Optional)Displaysnodealiaspropertiesforspecificport(s).Fora
detaileddescriptionofpossibleport‐stringvalues,referto“PortString
SyntaxUsedintheCLI”onpage 4‐2.