Specifications

show newaddrtraps Managing Switch Network Addresses and Routes
Enterasys Matrix N Standalone (NSA) Series Configuration Guide 12-13
Parameters
None.
Defaults
None,exceptthosenotedabove.
Mode
Switchcommand,Read‐Write.
Examples
ThisexampleshowshowtocleartheMACtimeoutperiod:
Matrix(rw)->clear mac agetime
ThisexampleshowshowtoclearalltheMACaddressesassociatedwithportfe.1.3:
Matrix(rw)->clear mac port-string fe.1.3
show newaddrtraps
UsethiscommandtodisplaythestatusofMACaddresstrapsononeormoreports.
Syntax
show newaddrtrap [port-string]
Parameters
Defaults
Ifport‐stringisnotspecified,MACaddresstrapsforallportswillbedisplayed.
Mode
Switchcommand,Read‐Only.
vlan‐idvlan‐id Specif yaVLANIDfromwhichtocleartheMACaddress
forstatic
multicastentriesonly.
port‐stringport‐string Singleporttoclear(ex.fe.1.1);ifnotspecified,clearcommandshallbe
scopedtoallports.
type{learned|mgmt} Statustypetoclear;ifnotspecified,clearcommandshallbescopedto
allʹlearnedʹandʹmgmtʹentrieswheremgmtreferstoallstatically
enteredMAC
addresses.
agetime (Optional)Cleartimeoutperiodtodefaultvalueof300seconds.
unicast‐as‐
multicast
(Optional)Thelayer2lookuptoattempttomatchtheunlearned
destinationMACaddressagainstthestaticmulticastMACentries
cleared.
port‐string (Optional)DisplaysMACaddresstrapsforspecificport(s).Fora
detaileddescriptionofpossibleport‐stringvalues,referto“PortString
SyntaxUsedintheCLI”onpage 4‐2.