Specifications

set mac Managing Switch Network Addresses and Routes
Enterasys Matrix N Standalone (NSA) Series Configuration Guide 12-11
Matrix(rw)->show mac port-string fe.1.3
MAC Address FID Port Type Status
----------------- ---- ------------- ------- -------
00-01-F4-32-88-C5 0 fe.1.3 self
00-00-1D-12-11-88 3 fe.1.3 mgmt perm
Table 123providesanexplanationofthecommandoutput.
set mac
UsethiscommandtosetthetimeoutperiodforaginglearnedMACentries,todefinewhatportsa
multicastaddresscanbedynamicallylearnedonorfloodedto,andtomakeastaticentryintothe
filteringdatabase(s).
Syntax
set mac [agetime time] | [multicast mac-address vlan-id [port-string] {append |
clear}] | [unicast mac-address fid receive-port [ageable]] [unicast-as-multicast
{enable | disable}]
Parameters
Table 12-3 show mac Output Details
Output... What it displays...
MAC Address MAC addresses mapped to the port(s) shown.
FID Filter database identifier.
Port Port designation.
Type Address type. Valid types are:
other - entry is other than below
invalid - entry is no longer valid, but has not been yet flushed-out
learned - entry has been learned and is currently used
self - entry represents one of the device's address
mgmt - entry represents a dot1qStaticUnicastAddress (manually
entered MAC address)
mcast - entry represents a dot1qStaticMulticastAddress
Status Address status. Valid types are:
other - entry is other than below
invalid - entry shall be removed
perm - entry is currently in use and shall remain so AFTER the next
reset (permanent)
agetimetime SpecifiesthetimeoutperiodinsecondsforaginglearnedMAC
addresses.Validvaluesare10to65535.
multicastmacaddress
vlanid[portstring]
{append|clear}]
Thiscommandallowsyoutolimitspecificlayertwomulticast
addresses(
mac-address)tospecificports(port-string)withinaVLAN
(
vlan-id).Youcanlatercomebackandappendorclearportsfromthe
listofportsthemulticastMACaddressisallowedtobedynamically
learnedonorfloodedto.