Specifications

Startup and General Configuration Summary
2-10 Startup and General Configuration
notifyprofile SNMP notify profile configuration
targetaddr SNMP target address configuration
targetparams SNMP target parameters configuration
user SNMP USM user configuration
view SNMP VACM view tree configuration
Matrix(rw)->show snmp
Matrix(rw)->show snmp user ?
list List usernames
<user> User name
remote Show users with remote SNMP engine ID
volatile Show temporary entries
nonvolatile Show permanent entries
read-only Show r/o entries
<cr>
Matrix(rw)->show snmp user
Enteringaquestionmark(?)withoutaspaceafterapartialkeywordwilldisplayalistof
commandsthatbeginwiththepartialkeyword.Figure 2‐3showshowtousethisfunctionforall
commandsbeginningwithco:
Figure 2-3 Performing a Partial Keyword Lookup
Matrix(rw)->co?
configure Execute a configuration file
copy Upload or download an image or configuration file
Matrix(rw)->co
Displaying Scrolling Screens
IftheCLIscreenlengthhasbeensetusingthesetlengthcommandasdescribedin“setlength”on
page 2‐52,CLIoutputrequiringmorethanonescreenwilldisplay‐‐More‐‐toindicatecontinuing
screens.Todisplayadditionalscreenoutput:
•PressanykeyotherthanENTERtoadvancetheoutput
onescreenatatime.
•PressENTERtoadvancetheoutputonelineatatime.
TheexampleinFigure 2‐4showshowtheshowmaccommandindicatesthatoutputcontinueson
morethanonescreen.
Figure 2-4 Scrolling Screen Output
Matrix(rw)->show mac
MAC Address FID Port Type
----------------------------------------------------------
00-00-1d-67-68-69 1 host.0.1 learned
00-00-02-00-00-00 1 fe.1.2 learned
Note: At the end of the lookup display, the system will repeat the command you entered without the
?.