Specifications

set smon vlan Configuring SMON

Enterasys Matrix N Standalone (NSA) Series Configuration Guide 11-11

Status = enabled

--------------------

VLAN 1 Packets Octets

Total 8011072 2070785503

Overflow 0 0

NonUnicast 0 0

NonUnicast Overflow 0 0

set smon vlan

Usethiscommandtocreate,start,orstopSNMPVLAN‐relatedstatisticscounting.

Syntax

set smon vlan {create | enable | disable} port-string [owner]

Parameters

Defaults

Ifownerisnotspecified,nonewillbeapplied.

Mode

Switchcommand,Read‐Write.

Example

ThisexampleshowshowsetthedevicetogatherSMONVLAN‐relatedstatisticsfrom1‐Gigabit

Ethernetport14inportgroup3:

Matrix(rw)->set smon vlan ge.3.14

clear smon vlan

UsethiscommandtodeleteanSMONVLANstatisticscountingconfiguration.

Syntax

clear smon vlan [port-string]

create|enable|

disable

Creates,enables,ordisablesSMONVLANstatisticscounting.Create

automaticallyenables(starts)counters.

port‐string Specifiesoneormoresourceportsonwhichtocollectstatistics.Fora

detaileddescriptionofpossibleport‐stringvalues,referto“PortString

SyntaxUsedintheCLI”onpage 4‐

owner (Optional)Specifiesanadministrativelyassignednameoftheownerof

thisentity.