Specifications

Configuring IGMP clear igmp protocols
9-14 IGMP Configuration
Defaults
None.
Mode
Switchcommand,Read‐Write.
Example
ThisexampleshowshowtochangeIGMProutingprotocolstoaprotocolidof3:
Matrix(rw)->set igmp protocols classification 2 protocol-id 3 modify
clear igmp protocols
UsethiscommandtoclearthebindingofIPprotocolidtoIGMPclassification
Syntax
clear igmp protocols [protocol-id protocol-id]
Parameters
Defaults
None.
Mode
Switchcommand,Read‐Write.
Example
ThisexampleshowshowtoclearIGMPprotocolsforprotocolid3:
Matrix(rw)->clear igmp protocols protocol-id 3
show igmp vlan
UsethiscommandtodisplayIGMPinformationforaspecificVLAN.
Syntax
show igmp vlan [vlan-list]
Parameters
Defaults
Ifvlan‐listisnotdisplayed,informationforallVLANsaredisplayed.
Mode
Switchcommand,Read‐Only.
protocol‐idprotocol‐id Theprotocolidstochange(0‐255).
vlan‐list (Optional)ShowIGMP infoforthegivenVLAN.