Specifications

Configuring IGMP set igmp delete
9-10 IGMP Configuration
Example
ThisexampleshowshowtosettheIGMPqueryintervaltimeto250secondsonVLAN1:
Matrix(rw)->set igmp config 1 query-interval 250
set igmp delete
UsethiscommandtoremoveIGMPconfigurationsettingsforoneormoreVLANs.
Syntax
set igmp delete vlan-list
Parameters
Defaults
None.
Mode
Switchcommand,Read‐Write.
Example
ThisexampleshowshowtoremoveIGMPconfigurationsettingsforVLAN104:
Matrix(rw)->set igmp delete 104
show igmp groups
UsethiscommandtodisplayinformationaboutIGMPgroupsknowntooneormoreVLANs.
Syntax
show igmp groups [group group] [vlan-list vlan-list] [sip sip] [-verbose]
Parameters
Defaults
None.
Mode
Switchcommand,Read‐Only.
vlan‐list SpecifiestheVLAN(s)onwhichconfigurationsettingswillbecleared.
group GroupIPaddress(EnteringnoIPaddressshowsallgroups).
vlan‐list SpecifiestheVLAN(s)forwhichtodisplayIGMPgroupinformation.
sip SourceIPaddress(Enteringnosipshowsallsips).
‐verbose Showverbosedisplay.