Specifications

Configuring IGMP set igmp query-enable
9-6 IGMP Configuration
Defaults
None.
Mode
Switchcommand,Read‐Only.
Example
ThisexampleshowshowtodisplaytheIGMPquerystateforVLAN1:
Matrix(rw)->show igmp query 1
IGMP querying on vlan 1 is Disabled
set igmp query-enable
UsethiscommandtoenableIGMPqueryingononeormoreVLANs.
Syntax
set igmp query-enable vlan-list
Parameters
Defaults
None.
Mode
Switchcommand,Read‐Write.
Example
ThisexampleshowshowtoenableIGMPqueryingonVLAN104:
Matrix(rw)->set igmp query-enable 104
set igmp query-disable
UsethiscommandtodisableIGMPqueryingononeormoreVLANs.
Syntax
set igmp query-disable vlan-list
Parameters
Defaults
None.
vlan‐list SpecifiestheVLAN(s)onwhichtoenableIGMPquerying.
vlan‐list SpecifiestheVLAN(s)onwhichtodisableIGMPquerying.