Specifications

set cos port-config txq Configuring Policy Class of Service (CoS)
Enterasys Matrix N Standalone (NSA) Series Configuration Guide 8-37
set cos port-config txq
UsethiscommandtosettheClassofServicetransmitqueueportgroupconfiguration:
Syntax
set cos port-config txq group-type-index [name name] [ports port-list] [append] |
[clear]
Parameters
Defaults
•Ifanameisnotspecified,defaultnamesdescribedinTable 8‐5willbeapplied.
•Ifnotspecified,thisconfigurationwillbeappliedtoallportsintheportgroup.
•Ifappendorcleararenotspecified,port(s)willbeappendedtothespecifiedportgrouping.
•Ifarb‐sliceorarb‐percentage
valuesarenotspecified,defaultallocationswillbeapplied.
Mode
Switchcommand,Read‐Write.
Example
ThisexampleshowshowtocreateaCoStransmitqueueportgroupentrynamed“testtxq”witha
portgroupIDof2andaporttypeIDof1:
Matrix(rw)->set cos port-config txq 2.1 name test txq
clear cos port-config txq
Usethiscommandtoclearoneorallnon‐defaultClassofServicetransmitqueueportgroup
configurations:
Syntax
clear cos port-config txq all | group-type-index {entry | name | ports }
Parameters
group‐type‐index Specifiesatransmitqueueportgroup/typeindexforthisentry.Valid
entriesareintheformofgroup.type.Groupcanbe0‐7,with0
designatingthedefaultgroup,and1‐7reservedforuser‐defined
groups.Defaultporttypevaluescannotbechanged,andare0for
the
7GR4270‐12,7G4270‐12,7G4270‐09,and7 G4270‐10DFEmodulesonly,
and1forallothermodules.
namename (Optional)Specifiesanameforthisconfiguration.
portsport‐list (Optional)Appliesthisconfigurationtooneormoreportsintheport
group.
append|clear (Optional)Appendsorclearsportdesignations
fromapreviously
configuredportgroup.
all|group‐type‐index Clearsalltransmitqueueportconfigentriesoraspecificentry.
entry Clearsallnon‐defaulttransmitqueueentries.