Specifications

Configuring Policy Class of Service (CoS) show cos state
8-30 Policy Classification Configuration
show cos state
UsethiscommandtodisplaytheClassofServiceenablestate.
Syntax
show cos state
Parameters
None.
Defaults
None.
Mode
Switchcommand,Read‐Only.
Example
ThisexampleshowshowtoshowtheClassofServiceenablestate:
Matrix(rw)->show cos state
Class-of-Service application is enabled
set cos state
UsethiscommandtoenableordisableClassofService.
Syntax
set cos state{enable | disable}
Parameters
Defaults
None.
Mode
Switchcommand,Read‐Write.
set cos settings 8-46
clear cos settings 8-46
show cos violation irl 8-47
clear cos violation irl 8-47
clear cos all-entries 8-48
For information about... Refer to page...
enable|disable EnablesordisablesClassofServic.e