Specifications

clear policy port-hit Configuring Policy Class of Service (CoS)
Enterasys Matrix N Standalone (NSA) Series Configuration Guide 8-29
Purpose
Toconfigurepolicy‐basedClassofService.
Commands
Table 8-4 Configuring User-Defined CoS
To do this.... Use these commands...
Enable CoS. set cos state
If desired, create new or change existing CoS port configurations. set cos port-config irl
set cos port config txq
Define IRL or TXQ resources (data rates or transmit priorities). set cos port-resource irl
set cos port-resource txq
Bind a CoS reference index ID to a defined resource. set cos reference irl
set cos reference txq
Bind an IRL or TXQ reference ID to a CoS setting index ID. set cos setting
Associate CoS index IDs to policy rules. set policy rule
For information about... Refer to page...
show cos state 8-30
set cos state 8-30
show cos port-type 8-31
show cos unit 8-33
show cos port-config 8-34
set cos port-config irl 8-35
clear cos port-config irl 8-36
set cos port-config txq 8-37
clear cos port-config txq 8-37
show cos port-resource 8-38
set cos port-resource irl 8-39
clear cos port-resource irl 8-40
set cos port-resource txq 8-40
clear cos port-resource txq 8-41
show cos reference 8-42
set cos reference irl 8-43
clear cos reference irl 8-43
set cos reference txq 8-44
clear cos reference txq 8-44
show cos settings 8-45