Specifications

clear policy syslog Configuring Policy Profiles
Enterasys Matrix N Standalone (NSA) Series Configuration Guide 8-11
clear policy syslog
Usethiscommandtocleartheruleusageandextended‐formatsyslogmessagesettingstothe
defaultstate.
Syntax
clear policy syslog [machine-readable] [extended-format]
Parameters
Defaults
None.
Mode
Switchcommand,Read‐Write.
Example
Thisexampleshowshowtoclearthemachine ‐readableformattingofruleusagemessagestothe
defaultsettingofhuman‐readable:
Matrix(rw)->clear policy syslog machine-readable
set policy maptable
UsethiscommandtosettheSetVLANID‐PolicyProfilemappingstable.
Syntax
set policy maptable {vlan-list profile-index | response {tunnel | policy | both}}
Parameters
Defaults
None.
machine‐readable (Optional)Clearsthemachine‐readableformattingofruleusage
messagestoitsdefault,whichishuman‐readable(disabled).
extended‐format (Optional)Clearstheadditionalinformationintheruleusagesyslog
messagestoitsdefault,whichistheoriginalruleusagesyslogmessage
format(disabled).
vlan‐list VLANIDorrangeofIDs(1to4094)
profile‐index PolicyID(1to1023)
responsetunnel|
policy|both
IndicateswhichattributestousefromRADIUSresponse.
tunnel - Apply the vlan-tunnel attribute
policy - Apply the filter-id attribute
both - Apply both attributes