Specifications

Configuring Policy Profiles show policy invalid
8-6 Policy Classification Configuration
show policy invalid
Displaysinformationaboutthe actionthedevicewillapplyonaninvalidorunknownpolicy.
Syntax
show policy invalid {action | count | all}
Parameters
Defaults
None.
Mode
Switchcommand,Read‐Only.
Example
Thisexampleshowshowtodisplayinvalidpolicyactionandcountinformation:
Matrix(rw)->show policy invalid all
Current action on invalid/unknown profile is: Forward packets
Number of invalid/unknown profiles detected: 4
set policy invalid action
Usethiscommandtoassigntheactionthedevicewillapplytoaninvalidorunknownpolicy. 
Syntax
set policy invalid action {default-policy | drop | forward}
Parameters
Defaults
None.
Mode
Switchcommand,Read‐Write.
action|count|all Showstheactionthedeviceshouldtakeifaskedtoapplyaninvalidor
unknownpolicy,orthenumberoftimesthedevicehasdetectedan
invalid/unknownpolicy,orbothactionandcountinformation.
default‐policy Instructsthedevicetoignorethisresultandsearchforthenextpolicy
assignmentrule.
drop Instructsthedevicetoblocktraffic.
forward Instructsthedevicetoforwardtrafficasifnopolicyhasbeenassigned.