Specifications

clear policy profile Configuring Policy Profiles
Enterasys Matrix N Standalone (NSA) Series Configuration Guide 8-5
Defaults
Ifoptionalparametersarenotspecified,nonewillbeapplied.
Mode
Switchcommand,Read‐Write.
Example
Thisexampleshowshowtocreateapolicyprofile1named“netadmin”withPVIDoverride
enabledforPVID10,and Class‐of‐ServiceoverrideenabledforCoS5.ThisprofilecanuseVLAN
10foruntaggedegress:
Matrix(rw)->set policy profile 1 name netadmin pvid-status enable pvid 10 cos-
status enable cos 5 untagged-vlans 10
clear policy profile
Usethiscommandtodeleteapolicyprofileentry.
Syntax
clear policy profile profile-index
Parameters
Defaults
None.
Mode
Switchcommand,Read‐Write.
Example
Thisexampleshowshowtodeletepolicyprofile8:
Matrix(rw)->clear policy profile 8
append (Optional)Appendsthispolicyprofilesettingtosettingspreviously
specifiedforthispolicyprofilebytheegress‐vlans,forbidden‐vlans,or
untagged‐vlansparameters.
If append is not used, previous VLAN settings are replaced.
clear (Optional)Clearsthispolicyprofilesettingfromsettingspreviously
specifiedforthispolicyprofilebytheegress‐vlans,forbidden‐vlans,or
untagged‐vlansparameters.
profile‐index Specifies theindexnumberofthepolicyprofileentrytobedeleted.
Validvaluesare1to1023.